high beam NISSAN TITAN 2008 1.G Quick Reference Guide

3
HEADLIgHT AND T uRN sIg NAL CONTROL
TO aCTIV aTe TH e a UTOLI gHT SYST eM
(if so equipped):
Turn the headlight control switch
01
to the AuTO position
to activate the autolight system. The autolight system can:
 Turn the headlights on automatically when it is dark.
 Turn the headlights off automatically when it is light.
 Keep the headlights on for 45 seconds after you turn the ignition switch to OFF and
all doors are closed.
TO D eaCTIV aTe TH e aUTOLI gHT SYST eM :
 Turn the headlight control switch 01 to the OFF, or position.
H ea DLI gHT CONTROL SWITCH
 Turn the headlight control switch 01 to the position
to turn on the front parking,
tail, license plate and instrument panel lights.
 Turn the headlight control switch 01 to the position
to turn on the headlights. All
other lights remain on.
FO g LI gHT OP eR aTION ( IF SO eq UIPPeD )
N OTE: The headlights must be on and the low beams selected for the fog lights to
operate.
 Turn the switch 02 to the position
to turn on the fog lights.
 Turn the switch 02 to the OFF position to turn off the fog lights.
TURN SI gNaL SWITCH
 Move the headlight control switch up or down A to
signal a turning direction. When the turn is completed,
the turn signals cancel automatically.
 To signal a lane change, move the headlight control
switch up or down
B to the point where the indicator
light begins to flash, but the headlight control switch

does not latch.
HI gH B eaM
 Push the headlight control switch forward C to
select the high beam function. The blue
indicator
light illuminates. Pull the headlight switch back to the
original position to select the low beam. The blue

indicator light goes off.
 Pull and release the headlight control switch D to flash
the headlight high beams on and off.
0102
A B
B A
C
D
3